Building a 3D printer Archives

My DIY 3D Printer First Print (9 of 9)

I added the heated bed and connected the cold end [...]

My DIY 3D Printer First Print (9 of 9)Kevin Draper2018-10-30T22:22:32-05:00

DIY 3D Printer Software A 3D printer needs special 3D [...]

My DIY 3D Printer Software (8 of 9)Kevin Draper2018-10-30T22:01:15-05:00

Now it's time for the DIY 3D printer belts, motors, [...]

My DIY 3D Printer Belts (7 of 9)Kevin Draper2018-10-30T21:59:58-05:00

The DIY 3D printer X-axis and Z-axis are next. With [...]

My DIY 3D Printer X-Axis / Z-Axis (6 of 9)Kevin Draper2018-10-30T21:59:04-05:00

There is a variety of 3D printer designs out there, [...]

My DIY 3D Printer Y-Axis (5 of 9)Kevin Draper2018-10-30T21:56:44-05:00

I did my homework and figured out what else I [...]

My DIY 3D Printer Cost (4 of 9)Kevin Draper2018-10-30T21:54:58-05:00

DIY 3D Printer Open Source Hardware - Ups and Downs [...]

My DIY 3D Printer Open Source Hardware (3 of 9)Kevin Draper2018-10-30T21:52:11-05:00

The place to start was the DIY 3D printer frame. [...]

My DIY 3D Printer Frame (2 of 9)Kevin Draper2018-10-30T21:46:57-05:00

My DIY 3D printer Yes, call me a [...]

My DIY 3D Printer – Starting (1 of 9)Kevin Draper2018-10-30T21:38:13-05:00